Our Flush Fire Door ranges are designed for projects where fire safety, durability, and premium design are essential, the Deanta Prefinished Walnut Flush FD60 Fire Door offers certified 60-minute fire resistance in a clean, architectural flush design.
Featuring a real North American walnut veneer, this FD60 fire door brings natural warmth and character to commercial corridors, apartments, HMOs, hotels, and high-spec residential interiors. The closed-grain prefinished surface delivers a smooth, consistent appearance while eliminating the need for on-site finishing.
A solid core construction provides strength, stability, and acoustic benefits, while solid lippings on all edges allow for precise trimming during installation. With FSC® certified materials and Deanta’s 10-year manufacturer warranty, this FD60 fire door is built for long-term performance and compliance.
KEY FEATURES & SPECIFICATIONS
-
Real North American walnut veneer, prefinished
-
Closed-grain finish for a refined architectural appearance
-
FD60 fire-rated – certified 60-minute fire resistance
-
Solid core construction for strength, stability, and durability
-
Solid lippings on all edges
-
Can be trimmed by up to 3mm per edge (6mm total width and height)
-
FSC® certified sustainable timber
-
Suitable for commercial, residential, apartments, and HMO use
-
Compatible with fire-rated ironmongery and hardware packs
-
Covered by the Deanta 10-year manufacturer’s warranty
📏 SIZES, AVAILABILITY & LEAD TIMES (IMPORTANT)
To avoid delays, please check availability before ordering, as lead times vary by size:
Stocked sizes:
🚚 Delivery in 3–7 working days
Selected made-to-order sizes:
🕒 Approx. 10-14 weeks
If you’re unsure which sizes are stocked or need help selecting the correct specification, contact our team and we’ll confirm availability before you place your order.
DEANTA ARCHITECTURAL FLUSH FIRE DOOR
Part of Deanta’s Architectural Flush Fire Door Range, this walnut FD60 model is engineered for environments where fire compliance and design quality are equally important. These doors are commonly specified in:
-
Apartment blocks
-
Hotels and serviced accommodation
-
HMOs and student housing
-
Commercial corridors
-
High-traffic residential developments
Also available in alternative thicknesses and ratings within the Deanta flush range.
WHY CHOOSE THE DEANTA WALNUT FD60 FLUSH FIRE DOOR?
If your project demands maximum fire protection paired with a premium natural timber finish, the Deanta Prefinished Walnut Flush FD60 Fire Door is a dependable solution. With certified FD60 performance, sustainable materials, and a ready-finished surface, it reduces installation time while meeting strict building regulations.
Fire Door Installation & Compliance (FD60 Rated)
- FD60 fire-rated doors provide up to 60 minutes of fire protection, helping to slow the spread of fire and smoke
- To maintain certification, intumescent seals must be fitted to the head and both jambs
- For this Deanta FD60 Type 5 specification, the approved alternative using Lorient LP1504 / LP1504DS requires:
- 2 x 15mm x 4mm intumescent seals per edge
- seals fitted 10mm apart
- On a single door, that means:
- 2 seals on the head
- 2 seals on one side
- 2 seals on the other side
- For double doors, the meeting edge must also have matching intumescent installed
- Doors must be installed with certified fire-rated hinges and compatible hardware
- Maintain correct gaps of 2mm to 4mm at the top and sides, with the bottom gap not exceeding 8mm
- Fire doors should be fitted by a competent installer and always in line with the manufacturer’s tested specification
